Make A Simple And Quick Pond Plant Pruner (AKA- Good Old Polish Ingenuity) :o)

So the weather got cold sooner than you expected (or hoped), and you still need to get those Waterlily and Lotus leaves trimmed off before they rot in the pond. i don't know about you, but i don't want to get into 50 degree water for maintenance! SO, i use the handy-dandy pond plant trimmer i 'invented'! i use this thing all season and thought i'd share the instructions. 

Here is what you'll need:

• 
  
  One of those cheap plastic envelope openers you can find at office supply stores or that a lot of places give away (at least around here!)
  
  
  
• 
  
  A long sturdy stick (mine is bamboo, about 5-6 ft long, enough to reach at least halfway across the watergarden) with 2 or 3 notches cut into the end
  
  
  
• 
  
  Cable ties or 'zip' ties, the kind that lock securely. i like to use a dark color - it seems to be more resistant to the UV rays that make them brittle
  
  
  
• 
  
  A file or tool that will cut notches into the plastic letter opener - i use a pair of wire cutters, but whatever works for you
  
  
  

Cut 2 or 3 notches into the plastic - you just want to make sure it's secure and doesn't pull off and fall into the water (sharp plastic with RAZOR BLADE attached- get it? Very bad around pond liners!) i also cut off the little plastic guide piece that was near the blade - you want that a little wider by the blade

Attach the letter opener with the cable ties, making sure that you have it secured in shown direction, and that the ties fit in to the notches on both the opener AND the stick. Tighten the ties as much as you can, so that the opener feels secure and doesn't move.

Cut off the excess ends of the cable ties. 

If you can't picture how it works, here's a pic of how the cutter is placed around a lily stem.  

After you grab the stem with it, give it a sharp tug! Try to get as much stem as possible along with it. You'll get better with practice

i have become pretty good at using the flat side of the cutter to lift the leaves out, but you could just net them out as well.

One of these usually lasts me a season, and the cable ties have to be replaced periodically- check them before each use so you're sure they won't break when you're using it

Here i am using it to cut a Lotus stem (can you tell i'm really behind at my pond maintenance, too?) Yuck! Look at those skanky leaves!

Here is another 'invention'. This one works well to pull string algae out of the pond. Same principle - different tool - a toilet brush!